© 2018 HamiltonTileGA.com

The best bathroom remodel in Marietta, GA

Back again with another tile update from Hamilton Tile! This bathroom for the Mayhew's in Marietta, GA was a tile emergency. Their previous shower was built so incorrectly it leaked to the point of rotting out their house. The old shower was your basic, builder grade, minimum standard, blowout special that we see so often:

 

So, looking at the photos can you understand why I'm so hard on builders? This is why when you find a good builder you should keep him around. It's not as if they don't know that a shower has to be water proof, a shower sees more water per year than your roof...A LOT MORE. Shoddy building all over Atlanta creates a living for us, but this degree of obsolescence is unethical. Many builders are just plain shady. There I said it!  This is why I put this information out there, because ultimately when hiring a contractor you have to watch out for yourself! If the price seems to low, it probably is. If your contractor can't tell you why he does things, he probably doesn't know. If he doesn't cite ANSI or TCNA standards...He probably doesn't care and he's making it up as he goes..

This shower leaked enough to rot out this engineered beam. It could have been much much worse than this. We ended up doing some creative framing and plating the beam with 2x10's. You can see the mold and the damage this improperly built shower perpetrated. It had no pre-slope and the tile was set directly to sheet rock. It was a real GEM!

Nothing we couldn't handle:

In this video we get to putting things back together....Not below standard, or minimum standards...but LIFETIME standards. Schluter Systems, Trade school graduate, 20+ years experience.

 

We ended up eliminating the tub and building a wall for the fixtures. Notice the cleanliness, getting a high end finished product starts with the basics that we learned in shop class. Keep your space clean and organized, that way your customer is happy and you get to keep all your fingers and toes because you're going to have an accident free job.

I see many of the 'pros' using ledger boards for their first row...Here's a note, If you're pan is level all the way around from the start...you don't have to cut your bottom row of tile. They all go up the same size all the way around.

Using a leveling system for large format helps get a lip free install! The leveling system is the green wedges you see in the photo. You embed a clip in the thin set under the tile and insert a wedge to pull everything flat.

A big difference from start to finish. This was a rewarding job for us not only because we're pursuing a passion but because we got to work with people that were invested more than monetarily in their project. We had done work in this house previously and from the start of this job the Mayhew's were involved and excited. Just the fact that they visited this website makes all the work I do on it worth it. Some guys dread working around intrigued clients, mostly because their work is not above board. We love the engineer types because they care as much as we do which adds a whole other level of satisfaction. Like we always say: "If you care about how your project is built, WE WANT TO WORK FOR YOU!" Thanks to the Mayhew's for having us.

Be sure to check out the positive review:

 

Hamilton Tile Google Review

Hamilton Tile Houzz Review

 

 

Be sure to check out my process video!

New to video making, but it adds a new wrinkle so you can really get a taste of what we do. I'm sure the hundredth one will be ready for Sundance. As Scott Adams says, it pays to have a good talent stack and videos are now just another piece to the puzzle. Enjoy!